San-Air Surface Mould Remover 500ml

Cleaning mould should be easy and San-Air Surface Mould Remover makes sure to remove any visible mould on contact and prevents mould regrowth for up to 6 months. Surface Mould Remover thoroughly cleans any surface of mould without any harmful chemicals. Simply spray onto any surface, leave for 15 minutes then wipe away. Repeat if necessary, until all visible mould has been removed. 

San Air Mould Remover can be used on any surface or materials.

Key benefits

• Made with 100% naturally derived ingredients.

• Targets mould and bacteria

• Ready to use, easy to apply

Not Available

Set up

1. Adjust the nozzle to a fine spray, test the surface you want to clean by spraying a small area first. (Note it is normal to see the surface lighter in colour while wet).

Clean

1. Spray to coat mould evenly, wait 15 minutes and wipe the mould off with a clean dry cloth. Ensure that dirty clothes are not reused as you will spread the mould. Instead, for each wipe, use a clean area of the cloth until the cloth is used up, then continue cleaning with a new clean cloth.

2. Repeat step 2 until all mould has been removed.

Finish

1. Use a final spray with a fine mist and allow to air dry, leaving a fine mould prevention coating.

Follow the instructions on the label to get maximum results.

Please refer to the packaging